# Boiler Installation Vaughan | Combi & Hydronic Service

URL: https://boilerinstallationtoronto.ca/service-areas/vaughan/

![](/images/misc/service-van-parked-in-a-residential-gta-driveway-a.webp)

Toronto Boiler Installation

[/ →](/)

# Boiler Installation Vaughan: High-Efficiency, Combi, Replacement and Hydronic Heating Service Across Woodbridge, Concord and Maple

Last updated: October 27, 2026

\[Toronto Boiler Installation\](/) delivers boiler installation, hydronic heating retrofits, in-floor radiant heating design, and commercial boiler service throughout Vaughan, ON, backed by 22 years of TSSA G1/G2 licensed heating experience. Our technicians install Viessmann Vitodens 200, Weil-McLain Evergreen, Navien NFC, Buderus SSB, IBC SL, and Lochinvar Crest units across Woodbridge estate homes, Concord commercial buildings, Maple subdivisions, and Kleinburg heritage properties with 316L stainless steel heat exchangers, primary-secondary loops, in-floor radiant zone manifolds, and ASME-stamped commercial pressure vessels. Vaughan residential retrofits run $6,500 to $12,000 CAD for condensing installs, Woodbridge in-floor radiant $8,000 to $20,000 CAD, and commercial installations $8,500 to $18,000 CAD, with all applicable Enbridge and federal rebates filed on your behalf.

**Vaughan Cost Anchor:** Newer Vaughan hydronic systems run $5,500-$9,500 CAD for a combi swap. Combi boiler installation runs $4,500 to $8,500 CAD and a 95%+ AFUE condensing unit $6,500 to $12,000 CAD, with combined Enbridge and federal rebates offsetting up to $11,500 CAD.

Call (647) 254-9788

[tel:+16472549788 →](tel:+16472549788)

 

Request Written Installation Quote

[/contact/ →](/contact/)

-   L4H-L4L
-   Same-day GTA dispatch, 4-hour cold-snap response
-   TSSA G1/G2 Licensed Crew

-   Woodbridge
-   Concord
-   Maple

-   5-Star Customer Satisfaction
-   Same-Day GTA Emergency Dispatch
-   22 Years of Boiler Installation Experience
-   Written Workmanship Warranty

Common Objections

## What Actually Stops GTA Homeowners From Replacing an Aging Boiler

Four objections come up on almost every call. Here is the straight answer to each, with the CAD numbers attached.

### 1\. “The quote is huge, I am being oversold”

A high-efficiency condensing swap runs $6,500 to $12,000 CAD because it includes a new condensate line, PVC flue rework, near-boiler piping, expansion tank, zone controls, and the TSSA permit. Every line item appears on the quote in CAD. Combined Enbridge and federal rebates offset up to $11,500 CAD.

### 2\. “You cannot tell if the technician is really licensed”

Ontario requires TSSA G1 or G2 certification for gas boiler work, plus CSA B51 for large-BTU pressure vessels. Certificate numbers appear on every invoice and TSSA permit numbers appear on completed work.

### 3\. “Nobody publishes the price”

Our four CAD scope bands are published on this page: diagnostic $99 to $249, standard repair $200 to $1,200, major repair $1,200 to $3,500, and full combi installation $4,500 to $8,500. High-efficiency condensing runs $6,500 to $12,000 CAD.

### 4\. “The boiler is 25 years old, repair or replace?”

Cast iron lasts 30 to 50 years but drops to 60 to 70 percent efficiency by year 25. A modern 95% AFUE unit cuts natural gas bills 25 to 35 percent, qualifies for up to $11,500 CAD in rebates, and pays back in 6 to 10 years. You get a written repair-versus-replace on every diagnostic.

Talk it through with a licensed technician

[tel:+16472549788 →](tel:+16472549788)

Local Housing Stock

## What Boilers in Vaughan Actually Look Like

Newer hydronic housing stock with wall-mounted combi and condensing units approaching mid-life.

**Typical failure pattern:** Combi or condensing unit nearing end of life, prompting a same-brand or high-efficiency swap.

**Postal codes served:** L4H-L4L. Covering Woodbridge, Concord, Maple and the surrounding neighbourhoods, under City of Vaughan.

Newer Vaughan hydronic systems run $5,500-$9,500 CAD for a combi swap.

-   Same-day GTA dispatch, 4-hour cold-snap response
-   22 years serving Vaughan and York Region
-   TSSA G1/G2 technicians covering Woodbridge, Concord and Maple
-   4-hour cold-snap response

![Basement mechanical room with a condensing boiler in a Vaughan home](/images/misc/older-brick-home-basement-mechanical-room-with-cas.webp)

## Our Boiler Services in Vaughan

\[Toronto Boiler Installation\](/) delivers boiler installation, hydronic heating retrofits, in-floor radiant heating design, and commercial boiler service throughout Vaughan, ON, backed by 22 years of TSSA G1/G2 licensed heating experience. Our technicians install Viessmann Vitodens 200, Weil-McLain Evergreen, Navien NFC, Buderus SSB, IBC SL, and Lochinvar Crest units across Woodbridge estate homes, Concord commercial buildings, Maple subdivisions, and Kleinburg heritage properties with 316L stainless steel heat exchangers, primary-secondary loops, in-floor radiant zone manifolds, and ASME-stamped commercial pressure vessels. Vaughan residential retrofits run $6,500 to $12,000 CAD for condensing installs, Woodbridge in-floor radiant $8,000 to $20,000 CAD, and commercial installations $8,500 to $18,000 CAD, with all applicable Enbridge and federal rebates filed on your behalf.

 

![Wall-mounted 95%+ AFUE condensing boiler installed in a Toronto basement with copper near-boiler piping and PVC flue](/images/misc/wall-mounted-95-percent-afue-condensing-boiler-new.webp) Most Requested

### High-Efficiency Condensing Boiler Installation Toronto

95%+ AFUE condensing boiler installation with 316L stainless heat exchangers, ECM circulators, and PVC concentric venting, backed by 22 years of TSSA G1/G2 licensed experience on Viessmann Vitodens, Weil-McLain Evergreen, Navien NFC, and Bosch Greenstar units. Installation runs $6,500 to $12,000 CAD with combined Enbridge Home Efficiency Rebate Plus and Canada Greener Homes Grant offsetting up to $11,500 CAD.

$6,500 - $12,000 CAD

[High-Efficiency Condensing Boiler Installation Toronto →](/high-efficiency-boiler-installation-toronto/)

 

![Wall-mounted combi boiler installed in a compact Toronto utility room with isolation valves and domestic hot water piping](/images/misc/compact-wall-mounted-combi-boiler-installed-in-a-s.webp) Space Saver

### Combi Boiler Installation Toronto

Wall-mounted combi boiler installation with plate heat exchangers, ECM pumps, and descaling flush valves for GTA hard water, backed by 22 years of TSSA G1/G2 licensed retrofit experience on Navien NCB-E, Viessmann Vitodens 100-W, Rinnai i090SN, and Bosch Greenstar Combi units. Combi installations run $4,500 to $8,500 CAD, sized by GPM demand for homes under 2,500 sq ft.

$4,500 - $8,500 CAD

[Combi Boiler Installation Toronto →](/combi-boiler-installation-toronto/)

![Toronto Boiler Installation crew breaking down an old cast iron sectional boiler beside its new condensing replacement](/images/misc/old-cast-iron-sectional-boiler-being-broken-down-f.webp)

### Boiler Replacement Toronto

End-of-life gas boiler replacement for 15 to 40 year old cast iron sectional systems, backed by 22 years of TSSA G1/G2 licensed retrofit experience installing Viessmann Vitodens, Weil-McLain WM97+, and Navien NFC condensing units. Retrofits run $8,500 to $14,500 CAD, with combined Enbridge Home Efficiency Rebate Plus and Canada Greener Homes Grant offsetting up to $11,500 CAD.

$8,500 - $14,500 CAD

[Boiler Replacement Toronto →](/boiler-replacement-toronto/)

![Cascading commercial condensing boilers in a Toronto mid-rise mechanical room with common venting header](/images/misc/two-cascading-commercial-condensing-boilers-mounte.webp)

### Commercial Boiler Installation Toronto

Commercial rooftop and mechanical-room boiler installation to ASME pressure vessel code, CSA B51, and ASHRAE 90.1 standards, backed by 22 years of TSSA large-boiler certified experience on Lochinvar Crest, Viessmann Vitocrossal 300, Weil-McLain SlimFit, and Bradford White Copper Brute units with N+1 redundancy and low-NOx burners. Commercial installations run $8,500 to $18,000 CAD.

$8,500 - $18,000 CAD

[Commercial Boiler Installation Toronto →](/commercial-boiler-installation-toronto/)

![Restored cast iron column radiator with a thermostatic radiator valve in a pre-war Toronto living room](/images/misc/restored-cast-iron-column-radiator-with-a-thermost.webp)

### Hydronic Heating and Radiator Installation Toronto

Hydronic heating design with cast iron column radiators, baseboard convectors, thermostatic radiator valves, and oxygen-barrier PEX manifolds, backed by 22 years of TSSA G1/G2 licensed experience installing Runtal panels, Buderus Logatrend, tekmar controls, and Grundfos ALPHA circulators. Hydronic retrofits run $3,500 to $12,000 CAD, commissioned to CSA B214 with system balance verification.

$3,500 - $12,000 CAD

[Hydronic Heating and Radiator Installation Toronto →](/hydronic-heating-installation-toronto/)

![Oxygen-barrier PEX radiant loops laid across a Toronto basement slab before pour, with the manifold on the wall behind](/images/misc/oxygen-barrier-pex-radiant-loops-stapled-to-insula.webp)

### In-Floor Radiant Heating Toronto

In-floor radiant heating with 12-inch on-center PEX loops, thermostatic mixing valves, return-water temperature protection, and tekmar 260 outdoor reset controls, backed by 22 years of TSSA G1/G2 licensed radiant experience installing Uponor AquaPEX, Rehau RAUPEX, and Watts Radiant systems. Radiant retrofits run $8,000 to $20,000 CAD, staple-up or slab-on-grade to CSA B214.

$8,000 - $20,000 CAD

[In-Floor Radiant Heating Toronto →](/in-floor-radiant-heating-toronto/)

 

![Toronto Boiler Installation technician using a digital flue gas analyser during an annual 12-point boiler tune-up](/images/misc/technician-holding-a-digital-flue-gas-analyser-wit.webp) Best Value

### Boiler Maintenance and Annual Service Toronto

Annual 12-point boiler tune-up with digital combustion analysis, CO/CO2 ratio verification, expansion tank pre-charge testing, water pH checks, and pressure relief valve inspection, backed by 22 years of TSSA G1/G2 licensed maintenance service on Viessmann, Weil-McLain, Navien, Bosch, Buderus, and IBC systems. Annual maintenance runs $199 to $349 CAD, preserving manufacturer warranties.

$199 - $349 CAD

[Boiler Maintenance and Annual Service Toronto →](/boiler-maintenance-toronto/)

![Toronto Boiler Installation technician testing an ignition control board inside an opened boiler casing](/images/misc/technician-with-a-multimeter-testing-an-ignition-c.webp)

### Boiler Repair Toronto

Boiler repair for aquastats, control boards, gas valves, ignition modules, circulator pumps, and heat exchangers, backed by 22 years of TSSA G1/G2 licensed diagnostic experience on Viessmann, Weil-McLain, Navien, Bosch, Buderus, and IBC systems. Standard repairs run $200 to $1,200 CAD, major heat exchanger work $1,200 to $3,500 CAD with diagnostic waived on same-visit authorisation.

$200 - $3,500 CAD

[Boiler Repair Toronto →](/boiler-repair-toronto/)

 

![Technician diagnosing a failed boiler during an emergency no-heat call in a Toronto basement](/images/misc/technician-with-a-work-light-and-tool-case-diagnos.webp) 24/7 Dispatch

### Emergency Boiler Repair Toronto

24 hour emergency boiler repair with 4-hour cold-snap dispatch for no-heat calls, red-tag clearance, ignition-lockout troubleshooting, and frozen condensate line clearance, backed by 22 years of TSSA G1/G2 licensed emergency service on Viessmann, Weil-McLain, Navien, Bosch, and Buderus systems. After-hours diagnostic runs $199 to $349 CAD, same-day component repair $200 to $1,200 CAD.

$199 - $349 CAD

[Emergency Boiler Repair Toronto →](/emergency-boiler-repair-toronto/)

Why Choose Us

## Why Vaughan Trusts Toronto Boiler Installation

-   22 Years of Boiler Installation Experience across Toronto and the GTA
-   Combi swaps across Woodbridge, Concord and Maple from $5,500 to $9,500 CAD
-   Common Navien, Viessmann, Rinnai and NTI parts carried on the truck
-   TSSA G1 and G2 licensed technicians, code-compliant to B149 and CSA B51
-   Descaling flush valves fitted as standard for Vaughan hard water
-   Rebate paperwork for Enbridge and Canada Greener Homes filed on your behalf

The Framework

## How Our Vaughan Boiler Installation Works, 6 Steps

From the first call to the rebate cheque, here is exactly what happens and in what order.

1.  1
    
    ### Site assessment
    
    Postal code, home age, distribution type, existing AFUE, and heating load in BTU per square foot. Same-day or next-morning visit.
    
2.  2
    
    ### Manual J heat load and sizing
    
    Written heat load with boiler capacity sized to the actual home load. No oversizing, which is what causes short cycling.
    
3.  3
    
    ### Written quote, three options
    
    Combi, split system, and high-efficiency retrofit priced in CAD with parts, labour, permits, disposal, and rebate offset per option.
    
4.  4
    
    ### TSSA permit and scheduling
    
    Ontario Building Code Part 6 compliance verified. Installation within 3 to 7 business days standard, 24 to 48 hours on emergencies.
    
5.  5
    
    ### Installation and commissioning
    
    Boiler installed to CSA B51, near-boiler piping to ASHRAE 90.1, condensate neutralised, combustion analysis with a CO monitor, system purged and rebalanced.
    
6.  6
    
    ### Verification and rebate filing
    
    TSSA inspection where required, warranty registration filed, Enbridge and Canada Greener Homes paperwork submitted, written workmanship warranty issued.
    

## Need a boiler quote in Vaughan?

Published CAD pricing, TSSA-licensed technicians, and same-day dispatch across the whole coverage area.

(647) 254-9788

[tel:+16472549788 →](tel:+16472549788)

 

Get CAD Quote

[/contact/ →](/contact/)

## Reaching Woodbridge, Concord and Maple Across Highway 400 and 407

Vaughan is laid out around Highway 400, Highway 407, and Highway 7, which makes it one of the faster cities in our coverage area to reach outside rush hour. Crews run north on the 400 to Major Mackenzie Drive for Maple, cut east on Highway 7 for Concord, and take Islington Avenue or Weston Road for Woodbridge. Same-day dispatch is standard across the L4H to L4L postal codes.

The practical constraint in Vaughan is not traffic, it is parts. Newer subdivisions run a narrow set of wall-mounted combi and condensing units, so we carry the common Navien, Viessmann, Rinnai, and NTI service parts on the truck. That is why most Vaughan repair calls are closed on the first visit rather than turning into a return trip for a circulator or an ignition board.

Winter storm response follows the same pattern as the rest of the GTA. A no-heat call during a cold snap gets a technician within four hours, and if the unit cannot be restarted safely we quote the replacement on the spot with the CAD band published rather than gated.

## Vaughan Homes Are Newer, So the Failure Pattern Is Different

Vaughan housing stock is mostly post-1990, which changes the job completely compared with Old Toronto. There are very few cast iron radiators here. Instead you find wall-mounted combi units, sealed condensing boilers, hydronic baseboard, and in the larger Maple and Woodbridge custom homes, in-floor radiant loops feeding two to four zones.

Because the equipment is newer, the trigger for a call is rarely a cracked sectional. It is a combi reaching the 12 to 18 year mark and starting to lose domestic hot water flow, short-cycle on heating, or throw ignition lockout codes. GTA water hardness is the quiet culprit: scale builds on the flat-plate heat exchanger and the unit stops delivering the gallons per minute it was sized for.

That shapes how we quote. A Vaughan combi swap is normally a like-for-like replacement sized by simultaneous hot water demand rather than a full system redesign, which keeps it in the $5,500 to $9,500 CAD range. Where the home has radiant zones we also check the mixing valve and outdoor reset before recommending anything, because a control fault can look exactly like a failing boiler.

-   Wall-mounted combi replacement sized by simultaneous GPM demand
-   Descaling flush valves fitted for GTA hard water
-   Condensing boiler swaps on sealed direct-vent systems
-   Zone and radiant control diagnosis before equipment replacement
-   Hydronic baseboard balancing in Woodbridge and Concord subdivisions

Customer Feedback

## What Vaughan Customers Say

> Our Woodbridge combi lost pressure daily. They swapped it for a right-sized condensing combi for $8,300 CAD and rebalanced the loops.

Daniel R.

Woodbridge

5-Star Customer Satisfaction

> Concord home, aging boiler. Clear CAD options up front, new high-efficiency unit installed for $7,600 CAD with rebate filing handled.

Fatima N.

Concord

Top-Rated Contractor

> Maple radiant system needed a new circulator. Diagnosed and replaced with an ECM pump the same visit for $980 CAD.

Owen H.

Maple

Trusted by Homeowners and Businesses

Get a Quote

## Tell Us What Your Boiler Is Doing

Short form, no gatekeeping. A TSSA-licensed technician follows up with a written CAD quote for Vaughan, and the diagnostic fee comes off the invoice when you authorise the work on the same visit.

-   Four published CAD scope bands, never gated
-   Same-day GTA dispatch, 4-hour cold-snap response
-   Enbridge and Canada Greener Homes paperwork filed for you
-   Written workmanship warranty on labour

### Thanks, we have your message.

A TSSA-licensed technician follows up within one business day.

## Request a Written Installation Quote

Send the details and a TSSA-licensed technician follows up with an itemised CAD quote. No email address required from us, no quote gating from you.

Local Questions

## Boiler Installation Vaughan: Frequently Asked Questions

### How quickly can you reach Woodbridge, Concord or Maple?

Same-day dispatch is standard across the L4H to L4L postal codes and cold-snap no-heat calls get a technician within four hours. Crews route on Highway 400, Highway 7, and Islington Avenue depending on the neighbourhood.

### What does a combi boiler swap cost in Vaughan?

Newer Vaughan hydronic systems run $5,500 to $9,500 CAD for a combi swap. A standard high-efficiency condensing installation is $6,500 to $12,000 CAD. Enbridge Home Efficiency Rebate Plus offsets up to $6,500 CAD and the Canada Greener Homes Grant up to $5,000 CAD on qualifying work.

### My combi is losing hot water flow. Is that the boiler or the plumbing?

In Vaughan it is usually scale on the flat-plate heat exchanger from hard water. A descaling flush often restores flow for a few hundred dollars. If flow does not recover, the exchanger is fouled past recovery and we quote the replacement with the CAD band published up front.

### Do you service in-floor radiant systems in Maple custom homes?

Yes. We diagnose the mixing valve, outdoor reset sensor, circulator, and zone controls before recommending equipment, because a control fault often presents exactly like a failing boiler. Radiant work is priced by zone count.

### Can you match my existing brand?

Yes. We are manufacturer certified for Viessmann, Weil-McLain, Navien, Bosch, Buderus, IBC, NTI, Lochinvar, and Rinnai, and we use Ontario distributor parts so the manufacturer warranty stays valid.

### Which rebates apply in Vaughan?

The same Ontario and federal programs apply across the GTA: Enbridge Home Efficiency Rebate Plus up to $6,500 CAD, Canada Greener Homes Grant up to $5,000 CAD, and the Canada Greener Homes Loan up to $40,000 CAD at 0% interest. We file the paperwork.

### Do you cover Kleinburg and Thornhill as well?

Yes. The Vaughan dispatch covers the full L4H to L4L range plus the neighbouring Richmond Hill, Markham, and North York boundaries, so Kleinburg and Thornhill addresses are handled on the same day schedule.

### Will a new combi need different venting?

Usually not. Most Vaughan homes already run PVC direct venting from the original condensing unit, so a like-for-like swap reuses the penetration. If the replacement changes capacity or vent diameter we resize the run and confirm clearances under B149.

### Still have a question about your boiler?

Talk to a TSSA-licensed technician. Same-day GTA dispatch, 4-hour cold-snap response.

(647) 254-9788

[tel:+16472549788 →](tel:+16472549788)

 

Request Written Installation Quote

[/contact/ →](/contact/)

## Boiler Service Coverage in Vaughan

Get Directions

[https://www.google.com/maps/dir/?api=1&destination=43.8361,-79.4985 →](https://www.google.com/maps/dir/?api=1&destination=43.8361,-79.4985)

## We Also Cover These Areas Near Vaughan

Boiler Installation Richmond HillRichmond Hill hydronic and combi systems run $5,500-$9,500 CAD for a swap. View Richmond Hill page

[/service-areas/richmond-hill/ →](/service-areas/richmond-hill/)

 

Boiler Installation North YorkNorth York retrofits run $8,500-$14,500 CAD for older cast iron, $5,500-$9,500 CAD for newer combi swaps. View North York page

[/service-areas/north-york/ →](/service-areas/north-york/)

 

Boiler Installation MarkhamMarkham hydronic and combi systems run $5,500-$9,500 CAD for a swap; radiant work scales with zone count. View Markham page

[/service-areas/markham/ →](/service-areas/markham/)

![](/images/misc/tssa-licensed-technician-closing-the-front-panel-o.webp)

Same-Day Emergency Dispatch, 24/7 Cold Snap Response

## Book Boiler Installation in Vaughan

Same-day dispatch with a four hour cold-snap response, and an itemised CAD quote before any work starts.

Call (647) 254-9788

[tel:+16472549788 →](tel:+16472549788)

 

Request Written Installation Quote

[/contact/ →](/contact/)

-   Written workmanship warranty
-   Published CAD pricing, no quote gating
-   TSSA G1/G2 licensed technicians
