# Boiler Installation Scarborough | Replacement & Combi

URL: https://boilerinstallationtoronto.ca/service-areas/scarborough/

![](/images/misc/service-van-parked-in-a-residential-gta-driveway-a.webp)

Toronto Boiler Installation

[/ →](/)

# Boiler Installation Scarborough: High-Efficiency, Combi, Replacement and Hydronic Heating Service Across Agincourt and Guildwood

Last updated: October 27, 2026

\[Toronto Boiler Installation\](/) delivers boiler installation, high-efficiency condensing retrofits, cast iron replacement projects, and hydronic system rebuilds throughout Scarborough, ON, backed by 22 years of TSSA G1/G2 licensed heating experience. Our technicians install Viessmann Vitodens 100, Weil-McLain Evergreen, Navien NFC, Bosch Greenstar, and Rinnai i090SN units on Agincourt subdivisions, Guildwood bluff-adjacent homes, Birch Cliff mid-century properties, Malvern high-rise condos, and Wexford post-war bungalows with ECM circulators, primary-secondary loops, and expansion tank pre-charge verification. Scarborough condensing installations run $6,500 to $12,000 CAD, cast iron retrofits $8,500 to $14,500 CAD, and combined Enbridge and Canada Greener Homes rebates offset up to $11,500 CAD on qualifying 95%+ AFUE systems.

**Scarborough Cost Anchor:** Scarborough retrofits run $8,500-$14,500 CAD for older cast iron, $5,500-$9,500 CAD for newer combi swaps. Combi boiler installation runs $4,500 to $8,500 CAD and a 95%+ AFUE condensing unit $6,500 to $12,000 CAD, with combined Enbridge and federal rebates offsetting up to $11,500 CAD.

Call (647) 254-9788

[tel:+16472549788 →](tel:+16472549788)

 

Request Written Installation Quote

[/contact/ →](/contact/)

-   M-series (Scarborough)
-   Same-day GTA dispatch, 4-hour cold-snap response
-   TSSA G1/G2 Licensed Crew

-   Agincourt
-   Guildwood
-   Birch Cliff

-   5-Star Customer Satisfaction
-   Same-Day GTA Emergency Dispatch
-   22 Years of Boiler Installation Experience
-   Written Workmanship Warranty

Common Objections

## What Actually Stops GTA Homeowners From Replacing an Aging Boiler

Four objections come up on almost every call. Here is the straight answer to each, with the CAD numbers attached.

### 1\. “The quote is huge, I am being oversold”

A high-efficiency condensing swap runs $6,500 to $12,000 CAD because it includes a new condensate line, PVC flue rework, near-boiler piping, expansion tank, zone controls, and the TSSA permit. Every line item appears on the quote in CAD. Combined Enbridge and federal rebates offset up to $11,500 CAD.

### 2\. “You cannot tell if the technician is really licensed”

Ontario requires TSSA G1 or G2 certification for gas boiler work, plus CSA B51 for large-BTU pressure vessels. Certificate numbers appear on every invoice and TSSA permit numbers appear on completed work.

### 3\. “Nobody publishes the price”

Our four CAD scope bands are published on this page: diagnostic $99 to $249, standard repair $200 to $1,200, major repair $1,200 to $3,500, and full combi installation $4,500 to $8,500. High-efficiency condensing runs $6,500 to $12,000 CAD.

### 4\. “The boiler is 25 years old, repair or replace?”

Cast iron lasts 30 to 50 years but drops to 60 to 70 percent efficiency by year 25. A modern 95% AFUE unit cuts natural gas bills 25 to 35 percent, qualifies for up to $11,500 CAD in rebates, and pays back in 6 to 10 years. You get a written repair-versus-replace on every diagnostic.

Talk it through with a licensed technician

[tel:+16472549788 →](tel:+16472549788)

Local Housing Stock

## What Boilers in Scarborough Actually Look Like

Post-war housing stock where end-of-life gas boilers are common.

**Typical failure pattern:** End-of-life gas boiler needing replacement or a high-efficiency retrofit.

**Postal codes served:** M-series (Scarborough). Covering Agincourt, Guildwood, Birch Cliff and the surrounding neighbourhoods, under City of Toronto (Scarborough).

Scarborough retrofits run $8,500-$14,500 CAD for older cast iron, $5,500-$9,500 CAD for newer combi swaps.

-   Same-day GTA dispatch, 4-hour cold-snap response
-   22 years serving Scarborough and Toronto
-   TSSA G1/G2 technicians covering Agincourt, Guildwood and Birch Cliff
-   4-hour cold-snap response

![Basement mechanical room with a condensing boiler in a Scarborough home](/images/misc/older-brick-home-basement-mechanical-room-with-cas.webp)

## Our Boiler Services in Scarborough

\[Toronto Boiler Installation\](/) delivers boiler installation, high-efficiency condensing retrofits, cast iron replacement projects, and hydronic system rebuilds throughout Scarborough, ON, backed by 22 years of TSSA G1/G2 licensed heating experience. Our technicians install Viessmann Vitodens 100, Weil-McLain Evergreen, Navien NFC, Bosch Greenstar, and Rinnai i090SN units on Agincourt subdivisions, Guildwood bluff-adjacent homes, Birch Cliff mid-century properties, Malvern high-rise condos, and Wexford post-war bungalows with ECM circulators, primary-secondary loops, and expansion tank pre-charge verification. Scarborough condensing installations run $6,500 to $12,000 CAD, cast iron retrofits $8,500 to $14,500 CAD, and combined Enbridge and Canada Greener Homes rebates offset up to $11,500 CAD on qualifying 95%+ AFUE systems.

 

![Wall-mounted 95%+ AFUE condensing boiler installed in a Toronto basement with copper near-boiler piping and PVC flue](/images/misc/wall-mounted-95-percent-afue-condensing-boiler-new.webp) Most Requested

### High-Efficiency Condensing Boiler Installation Toronto

95%+ AFUE condensing boiler installation with 316L stainless heat exchangers, ECM circulators, and PVC concentric venting, backed by 22 years of TSSA G1/G2 licensed experience on Viessmann Vitodens, Weil-McLain Evergreen, Navien NFC, and Bosch Greenstar units. Installation runs $6,500 to $12,000 CAD with combined Enbridge Home Efficiency Rebate Plus and Canada Greener Homes Grant offsetting up to $11,500 CAD.

$6,500 - $12,000 CAD

[High-Efficiency Condensing Boiler Installation Toronto →](/high-efficiency-boiler-installation-toronto/)

 

![Wall-mounted combi boiler installed in a compact Toronto utility room with isolation valves and domestic hot water piping](/images/misc/compact-wall-mounted-combi-boiler-installed-in-a-s.webp) Space Saver

### Combi Boiler Installation Toronto

Wall-mounted combi boiler installation with plate heat exchangers, ECM pumps, and descaling flush valves for GTA hard water, backed by 22 years of TSSA G1/G2 licensed retrofit experience on Navien NCB-E, Viessmann Vitodens 100-W, Rinnai i090SN, and Bosch Greenstar Combi units. Combi installations run $4,500 to $8,500 CAD, sized by GPM demand for homes under 2,500 sq ft.

$4,500 - $8,500 CAD

[Combi Boiler Installation Toronto →](/combi-boiler-installation-toronto/)

![Toronto Boiler Installation crew breaking down an old cast iron sectional boiler beside its new condensing replacement](/images/misc/old-cast-iron-sectional-boiler-being-broken-down-f.webp)

### Boiler Replacement Toronto

End-of-life gas boiler replacement for 15 to 40 year old cast iron sectional systems, backed by 22 years of TSSA G1/G2 licensed retrofit experience installing Viessmann Vitodens, Weil-McLain WM97+, and Navien NFC condensing units. Retrofits run $8,500 to $14,500 CAD, with combined Enbridge Home Efficiency Rebate Plus and Canada Greener Homes Grant offsetting up to $11,500 CAD.

$8,500 - $14,500 CAD

[Boiler Replacement Toronto →](/boiler-replacement-toronto/)

![Cascading commercial condensing boilers in a Toronto mid-rise mechanical room with common venting header](/images/misc/two-cascading-commercial-condensing-boilers-mounte.webp)

### Commercial Boiler Installation Toronto

Commercial rooftop and mechanical-room boiler installation to ASME pressure vessel code, CSA B51, and ASHRAE 90.1 standards, backed by 22 years of TSSA large-boiler certified experience on Lochinvar Crest, Viessmann Vitocrossal 300, Weil-McLain SlimFit, and Bradford White Copper Brute units with N+1 redundancy and low-NOx burners. Commercial installations run $8,500 to $18,000 CAD.

$8,500 - $18,000 CAD

[Commercial Boiler Installation Toronto →](/commercial-boiler-installation-toronto/)

![Restored cast iron column radiator with a thermostatic radiator valve in a pre-war Toronto living room](/images/misc/restored-cast-iron-column-radiator-with-a-thermost.webp)

### Hydronic Heating and Radiator Installation Toronto

Hydronic heating design with cast iron column radiators, baseboard convectors, thermostatic radiator valves, and oxygen-barrier PEX manifolds, backed by 22 years of TSSA G1/G2 licensed experience installing Runtal panels, Buderus Logatrend, tekmar controls, and Grundfos ALPHA circulators. Hydronic retrofits run $3,500 to $12,000 CAD, commissioned to CSA B214 with system balance verification.

$3,500 - $12,000 CAD

[Hydronic Heating and Radiator Installation Toronto →](/hydronic-heating-installation-toronto/)

![Oxygen-barrier PEX radiant loops laid across a Toronto basement slab before pour, with the manifold on the wall behind](/images/misc/oxygen-barrier-pex-radiant-loops-stapled-to-insula.webp)

### In-Floor Radiant Heating Toronto

In-floor radiant heating with 12-inch on-center PEX loops, thermostatic mixing valves, return-water temperature protection, and tekmar 260 outdoor reset controls, backed by 22 years of TSSA G1/G2 licensed radiant experience installing Uponor AquaPEX, Rehau RAUPEX, and Watts Radiant systems. Radiant retrofits run $8,000 to $20,000 CAD, staple-up or slab-on-grade to CSA B214.

$8,000 - $20,000 CAD

[In-Floor Radiant Heating Toronto →](/in-floor-radiant-heating-toronto/)

 

![Toronto Boiler Installation technician using a digital flue gas analyser during an annual 12-point boiler tune-up](/images/misc/technician-holding-a-digital-flue-gas-analyser-wit.webp) Best Value

### Boiler Maintenance and Annual Service Toronto

Annual 12-point boiler tune-up with digital combustion analysis, CO/CO2 ratio verification, expansion tank pre-charge testing, water pH checks, and pressure relief valve inspection, backed by 22 years of TSSA G1/G2 licensed maintenance service on Viessmann, Weil-McLain, Navien, Bosch, Buderus, and IBC systems. Annual maintenance runs $199 to $349 CAD, preserving manufacturer warranties.

$199 - $349 CAD

[Boiler Maintenance and Annual Service Toronto →](/boiler-maintenance-toronto/)

![Toronto Boiler Installation technician testing an ignition control board inside an opened boiler casing](/images/misc/technician-with-a-multimeter-testing-an-ignition-c.webp)

### Boiler Repair Toronto

Boiler repair for aquastats, control boards, gas valves, ignition modules, circulator pumps, and heat exchangers, backed by 22 years of TSSA G1/G2 licensed diagnostic experience on Viessmann, Weil-McLain, Navien, Bosch, Buderus, and IBC systems. Standard repairs run $200 to $1,200 CAD, major heat exchanger work $1,200 to $3,500 CAD with diagnostic waived on same-visit authorisation.

$200 - $3,500 CAD

[Boiler Repair Toronto →](/boiler-repair-toronto/)

 

![Technician diagnosing a failed boiler during an emergency no-heat call in a Toronto basement](/images/misc/technician-with-a-work-light-and-tool-case-diagnos.webp) 24/7 Dispatch

### Emergency Boiler Repair Toronto

24 hour emergency boiler repair with 4-hour cold-snap dispatch for no-heat calls, red-tag clearance, ignition-lockout troubleshooting, and frozen condensate line clearance, backed by 22 years of TSSA G1/G2 licensed emergency service on Viessmann, Weil-McLain, Navien, Bosch, and Buderus systems. After-hours diagnostic runs $199 to $349 CAD, same-day component repair $200 to $1,200 CAD.

$199 - $349 CAD

[Emergency Boiler Repair Toronto →](/emergency-boiler-repair-toronto/)

Why Choose Us

## Why Scarborough Homeowners Book With Us

-   22 Years of Boiler Installation Experience across Toronto and the GTA
-   Corridor scheduling on Kingston Road and Sheppard Avenue East for tight arrival windows
-   Combi swaps $5,500 to $9,500 CAD, cast iron retrofits $8,500 to $14,500 CAD
-   Red-tag clearance and TSSA violation resolution handled end to end
-   TSSA G1 and G2 licensed, certificate numbers on every invoice
-   Enbridge and Canada Greener Homes rebate paperwork filed for you

The Framework

## How Our Scarborough Boiler Installation Works, 6 Steps

From the first call to the rebate cheque, here is exactly what happens and in what order.

1.  1
    
    ### Site assessment
    
    Postal code, home age, distribution type, existing AFUE, and heating load in BTU per square foot. Same-day or next-morning visit.
    
2.  2
    
    ### Manual J heat load and sizing
    
    Written heat load with boiler capacity sized to the actual home load. No oversizing, which is what causes short cycling.
    
3.  3
    
    ### Written quote, three options
    
    Combi, split system, and high-efficiency retrofit priced in CAD with parts, labour, permits, disposal, and rebate offset per option.
    
4.  4
    
    ### TSSA permit and scheduling
    
    Ontario Building Code Part 6 compliance verified. Installation within 3 to 7 business days standard, 24 to 48 hours on emergencies.
    
5.  5
    
    ### Installation and commissioning
    
    Boiler installed to CSA B51, near-boiler piping to ASHRAE 90.1, condensate neutralised, combustion analysis with a CO monitor, system purged and rebalanced.
    
6.  6
    
    ### Verification and rebate filing
    
    TSSA inspection where required, warranty registration filed, Enbridge and Canada Greener Homes paperwork submitted, written workmanship warranty issued.
    

## Need a boiler quote in Scarborough?

Published CAD pricing, TSSA-licensed technicians, and same-day dispatch across the whole coverage area.

(647) 254-9788

[tel:+16472549788 →](tel:+16472549788)

 

Get CAD Quote

[/contact/ →](/contact/)

## Dispatch Across Agincourt, Guildwood and Birch Cliff

Scarborough dispatch runs on Highway 401 with Kingston Road, Lawrence Avenue East, Sheppard Avenue East, and Markham Road as the local connectors. Agincourt sits north of the 401 around Sheppard and Kennedy, Guildwood south along Kingston Road, and Birch Cliff on the bluffs west of Midland. Same-day dispatch covers the Scarborough M-series postal codes.

Distance is the variable here. Scarborough is large, so we schedule by corridor rather than by appointment slot, grouping calls along Kingston Road or Sheppard Avenue East on the same run. That keeps arrival windows tight instead of giving you a full-day window.

Cold-snap response is four hours. On a no-heat call in post-war housing stock the diagnosis usually resolves quickly, because the failure modes on 25 to 40 year old gas boilers are well known and the parts for the common repairs are on the truck.

## Post-War Scarborough Homes and End-of-Life Gas Boilers

Agincourt, Guildwood, and Birch Cliff were built out through the 1950s and 1960s as post-war family housing. Basements are full height, utility rooms are small, and the heating system has usually been replaced once already. The equipment installed in that second round is now at the end of its service life.

The common pattern is a mid-efficiency gas boiler running around 80 percent AFUE, venting into a masonry chimney, feeding either original radiators or hydronic baseboard added during a renovation. It still works, but it is burning roughly a third more gas than a modern condensing unit would for the same heat, and it has no rebate value.

A lot of Scarborough homeowners choose a combi at replacement because it removes the separate hot water tank and frees floor space in a small utility room. Where the house still runs radiators, the better answer is usually a condensing boiler with return-water temperature protection so the radiators stay and the efficiency gain is real rather than theoretical.

-   End-of-life mid-efficiency gas boiler replacement
-   Combi swaps that remove the separate hot water tank and free utility room space
-   Condensing retrofits that retain original radiator distribution
-   Masonry chimney de-commissioning and PVC side-wall venting
-   Red-tag clearance and TSSA violation resolution

Customer Feedback

## What Scarborough Customers Say

> Agincourt boiler failed inspection. New high-efficiency unit installed to code for $8,700 CAD with paperwork filed.

Ravi M.

Agincourt

5-Star Customer Satisfaction

> Guildwood post-war home, aging boiler swapped for a combi for $6,800 CAD, freeing up the utility room.

Chloe B.

Guildwood

Top-Rated Contractor

> Birch Cliff no-heat call on a Sunday. Emergency dispatch fixed the ignition lockout for $580 CAD.

Malik J.

Birch Cliff

Trusted by Homeowners and Businesses

Get a Quote

## Tell Us What Your Boiler Is Doing

Short form, no gatekeeping. A TSSA-licensed technician follows up with a written CAD quote for Scarborough, and the diagnostic fee comes off the invoice when you authorise the work on the same visit.

-   Four published CAD scope bands, never gated
-   Same-day GTA dispatch, 4-hour cold-snap response
-   Enbridge and Canada Greener Homes paperwork filed for you
-   Written workmanship warranty on labour

### Thanks, we have your message.

A TSSA-licensed technician follows up within one business day.

## Request a Written Installation Quote

Send the details and a TSSA-licensed technician follows up with an itemised CAD quote. No email address required from us, no quote gating from you.

Local Questions

## Boiler Installation Scarborough: Frequently Asked Questions

### How fast can you reach Agincourt or Guildwood?

Same-day dispatch covers the Scarborough M-series postal codes and cold-snap no-heat calls get a technician within four hours. We schedule by corridor along Kingston Road and Sheppard Avenue East so arrival windows stay tight.

### What does boiler installation cost in Scarborough?

Scarborough retrofits run $8,500 to $14,500 CAD where older cast iron distribution is kept and $5,500 to $9,500 CAD for newer combi swaps. A standard 95%+ AFUE condensing installation is $6,500 to $12,000 CAD. Rebates offset up to $11,500 CAD combined.

### My boiler was red-tagged. What now?

A red tag means the appliance has been shut off for a safety reason and cannot be relit until the fault is corrected. We attend, identify the violation, quote the correction in CAD, complete the work to B149, and clear the tag. That is a standard emergency call for us.

### Should I switch to a combi to free up my utility room?

It is a common choice in post-war Scarborough homes with small utility rooms, because a combi removes the separate hot water tank. The trade-off is that hot water and heating share one unit, so the combi has to be sized to simultaneous demand. We calculate that before recommending it.

### Is an 80% AFUE boiler worth keeping?

It works, but it burns roughly a third more gas than a 95%+ AFUE condensing unit for the same heat and it carries no rebate value. At replacement the condensing option costs $6,500 to $12,000 CAD against $3,500 to $5,500 CAD for mid-efficiency, and rebates plus gas savings usually close that gap in 6 to 10 years.

### Do you cover Malvern, Woburn and West Hill?

Yes. The full Scarborough M-series coverage includes Malvern, Woburn, West Hill, Cliffside, Wexford, and Highland Creek.

### What happens to my chimney on a high-efficiency install?

The boiler moves to PVC concentric or side-wall direct venting and the masonry flue is de-commissioned for it. If a gas water heater still shares that chimney, the liner is resized for the remaining appliance, and that work is included in the written quote.

### Do you offer annual maintenance?

Yes. The 12-point annual tune-up is $199 to $349 CAD and covers digital combustion analysis, CO and CO2 ratio check, flame rod and spark electrode inspection, expansion tank pre-charge, water pH and glycol testing, and a 30 PSI pressure relief valve test.

### Still have a question about your boiler?

Talk to a TSSA-licensed technician. Same-day GTA dispatch, 4-hour cold-snap response.

(647) 254-9788

[tel:+16472549788 →](tel:+16472549788)

 

Request Written Installation Quote

[/contact/ →](/contact/)

## Boiler Service Coverage in Scarborough

Get Directions

[https://www.google.com/maps/dir/?api=1&destination=43.7764,-79.2318 →](https://www.google.com/maps/dir/?api=1&destination=43.7764,-79.2318)

## We Also Cover These Areas Near Scarborough

Boiler Installation North YorkNorth York retrofits run $8,500-$14,500 CAD for older cast iron, $5,500-$9,500 CAD for newer combi swaps. View North York page

[/service-areas/north-york/ →](/service-areas/north-york/)

 

Boiler Installation TorontoOlder Toronto cast iron systems run $8,500-$14,500 CAD for a full high-efficiency retrofit. View Toronto page

[/service-areas/toronto/ →](/service-areas/toronto/)

 

Boiler Installation MarkhamMarkham hydronic and combi systems run $5,500-$9,500 CAD for a swap; radiant work scales with zone count. View Markham page

[/service-areas/markham/ →](/service-areas/markham/)

![](/images/misc/tssa-licensed-technician-closing-the-front-panel-o.webp)

Same-Day Emergency Dispatch, 24/7 Cold Snap Response

## Book Boiler Installation in Scarborough

Same-day dispatch with a four hour cold-snap response, and an itemised CAD quote before any work starts.

Call (647) 254-9788

[tel:+16472549788 →](tel:+16472549788)

 

Request Written Installation Quote

[/contact/ →](/contact/)

-   Written workmanship warranty
-   Published CAD pricing, no quote gating
-   TSSA G1/G2 licensed technicians
